5% OFF!!! Buy MATEK Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV Drone only US $5.23.

MATEK Power Distribution Board PDB-XT60 with BEC 5V/12V for FPV Drone

Price US $5.23 5.51 / 1 piece 5% OFF
Rating 5 of 5.0
Seller RC Model aircraft's Store

Returns accepted if product not as described, buyer pays return shipping fee; or keep the product & agree refund with seller.

On-time Delivery: Full Refund if product isn't received in delivery time estimated


Use : Vehicles & Remote Control Toys
Brand Name : Hoenvesta
Material : Composite Material
Remote Control Peripherals/Devices : ESC
Technical parameters : Value 2
Upgrade Parts/Accessories : Adapter
For Vehicle Type : Airplanes
RC Parts & Accs : Motor Components
Four-wheel Drive Attributes : Assemblage
Tool Supplies : Assembled class



Welcome to our store!

The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronized & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently.  
Built-in XT60 Socket  
2oz Copper, 4-Layers &1.6mm PCB
Total 6 pairs ESC solder tabs are fit for H or X type frame  
5V & 12V Output LED Indicators & Short Circuit Tolerant   
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC  
- Regulated 5V and 12V outputs  
- LED power indicators ( 5V & 12V outputs )  
- 6 ESC outputs & 1 pair VCC/GND pads   
ESC outputs:   
- Continuous current: 25A*4 or 15A*6  
- Peak current (10 seconds/minute): 30A*4 or 20A*6   
BEC 5V output:   
- Designed for RC Receivers, Flight controllers, OSD, and Servos.  
- DC/DC synchronous buck regulator.  
- Voltage: 5.0 +/- 0.1VDC  
- Continuous current: 2 Amps (Max.2.5A 10s/minute)  
- Output Ripple: 40mV (VIn=16V, [email protected] load)  
- Short-circuit tolerant (5 seconds/minute)    
BEC 12V output:   
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)  
- Voltage: 12.0 +/- 0.3VDC  
- Continuous current: 500mA (Max.0.8A 5s/minute)  
- Short-circuit tolerant (2 seconds/minute)   
BEC 12V @ 3S LiPo   
- Output voltage= 3S LiPo voltage -1V   
- Dimensions: 36 x 50 x 4 mm (without XT60)  
- Mounting: 30.5 x 30.5mm, Φ3mm  
- Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Package includes:
1* Power Distribution Board





Random Products